ALUMABUFF™ Removes Oxidation, Stains, Tarnish, Streaks & Discoloration.
Use with LINEAR BUFFER™ or By Hand. HYPEXINE™ lifts stains to the surface for easy removal.

DIRECTIONS:

Clean aluminum. Remove marine growth with ALGEX™ and dirt and pollutants with BOAT CLEAN PLUS™. Do Not Buff if ALUMABUFF™ dries out. Re-lubricate by spraying with water.

MACHINE BUFFING: Use a LINEAR BUFFER™ with an ALUMABUFF PAD™. Apply ALUMABUFF™ evenly to a 2 to 3 sq. ft. area and to the pad with a paint brush. Turn on the LINEAR BUFFER™ and apply to the aluminum surface while increasing pressure. Slowly move the machine from the top to the bottom, always keeping the length of the pad parallel to the grain of the aluminum. Repeat until the stains and streaks are removed. Continue to the adjacent section, maintaining a slight overlap. Rinse away residue or power wash.

HAND BUFFING: Apply ALUMABUFF™ evenly to a 1 sq. ft. section and to a MARINE POWER MITT™ or soft cloth pad with a paint brush. Buff the aluminum surface in a back and forth motion parallel to the direction of the grain until the stains and streaks are removed. Continue to the adjacent section, maintaining a slight overlap. Rinse away residue or power wash.

PROTECTION: After restoring your boat or pontoons, protect the surface against future staining, oxidation and salt damage for up to
5 years with ALUMETRON™. Apply VS721™ below the waterline to reduce marine fouling and to improve the performance and fuel economy of your boat.

DO NOT FREEZE
SHAKE WELL BEFORE USING

WARNING:
May cause skin & eye irritation. Do not swallow. Avoid Contact with eye & skin.

FIRST AID TREATMENT:
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Call a POISON CONTROL CENTER or doctor/physician if you feel unwell. IF IN EYES: Rinse them well with water. IF ON SKIN: Rinse well with water.