Product DirectionsEnglishBlue Water Hull Polish

  • LSE Polymer Protects Against Salt Attachment.
  • Easy to Apply. Wipe On – Wipe Off
  • Easy salt removal. Just rinse clean.
  • Long Lasting UV Protection
  • Diamond Hard, Anti-Static, Mirror Finish Shine

For Salt Water Boats. Superior Protection Against Salt Damage.

COVERAGE: 400sq. ft. ONE COAT (16oz Bottle), 3200sq. ft. ONE COAT (1US Gal Jug)

USE ON:

Gelcoat, Paint, ALUMETRON® protected aluminum.

DIRECTIONS

PREPARATION:

  1. NEW FIBERGLASS BOATS: (less than 2 years old) and painted hulls. Wash hull with BOAT CLEAN PLUS® and MARINE POWER MITT®. Rinse and dry.
  2. OLDER FIBERGLASS BOATS: As above, followed by scrubbing with BOAT SCRUB® and Marine Power Mitt®. Rinse and dry.
  3. CHALKY / OXIDIZED GELCOAT: As above followed by restoring shine by buffing with EZ Buff® and EZ Buff Extender®.

APPLICATION:

Apply BLUE WATER HULL POLISH® to a damp sponge and rub into gelcoat or painted surface. Work in manageable sections. When it hazes up wipe away haze to reveal mirror finish. Wipe within 15 minutes of haze forming. After 24 hours, apply 2nd coat. Wait 24 hours before launching boat.

DO NOT FREEZE
SHAKE WELL BEFORE USE
KEEP OUT OF REACH OF CHILDREN

CAUTION:

Contains Petroleum Distillates. In case of eye contact flush well with water. If swallowed, DO NOT induce vomiting. Call a Poison Control Center or doctor immediately.