Product DirectionsEnglishRepelin

• FOUL RELEASE BARRIER COAT FOR INFLATABLES

EASY TO APPLY:
Wipe on and buff to a super slippery, protective barrier coat that inhibits marine fouling. Movement of the boat through the water removes slime attachment.

DIRECTIONS:
Clean Inflatable with SPEED CLEAN™. Apply 2 coats POLY GUARD™ to all PVC or Hypalon surfaces. Allow minimum 24 hours to cure. Apply REPELIN™ with a damp sponge to all hull surfaces that will be submerged in water, including fiberglass & aluminum hulls & OB lower units. Rub vigorously & make sure that all exposed surfaces & crevices are coated. Allow to dry to haze. Remove haze with a soft cloth or brush. After 24 hrs. apply 2nd coat & buff to a shine. Allow minimum 48 hrs before launching boat.

NOTE:
Do not apply to Hypalon or PVC surfaces that have not been protected with POLY GUARD™. Do not apply to propellers.

SHAKE WELL BEFORE USING
DO NOT FREEZE
KEEP OUT OF REACH OF CHILDREN

CAUTION:
Contains Petroleum Distillates. In Case of eye contact flush well with water.
If swallowed, DO NOT induce vomiting. Call a Poison Control Center or doctor immediately.