• STOPS Rust, Corrosion, Pitting on Stainless Steel.
• Direct to Metal. No Primer Required.
• Hard, Durable Clear Coat. Not Oily. Resists Dust, Dirt, Fingerprints.
NOTE:
Not recommended for submerged Stainless Steel. Protect adjacent areas to avoid clean up.
PREPARATION:
Stainless steel must be clean, dry, free from rust, corrosion, oil and grease. Use QUICK SILVER® Stainless Rust Remover to remove rust and corrosion. Use BOAT CLEAN PLUS® to remove oil, grease and dirt.
DIRECTIONS:
Wipe on 2 thin coats STAINLESS SHIELD® with a lint free cloth pad in long even overlapping coats. Allow 1st coat to dry before applying 2nd coat. Do not overwork or bubbles and streaks will result.
| CURE TIME at 727°F (22°C) – 50% RH | APPLICATION TEMPERATURE |
| To touch 10 min. | 15°C – 35°C |
| To recoat 20 min. | 60°F – 95°F |
| To light service 8 hrs. | HUMIDITY |
| To full cure 48 hrs. | <80% RH |
CLEAN UP:
Soap & water.
DAMAGE REPAIR:
Repair scratched or abraded surfaces by cleaning damaged area as above and apply 2 thin coats of STAINLESS SHIELD® with a folded lint free cloth pad.
SAFETY:
Wear safety glasses and protect skin form excessive exposure. If splashed in eyes, rinse with water for 10 minutes. If on skin wash with soap and water.