• COVERAGE: 250sq. ft. ONE COAT (16oz bottle), 2000sq. ft. ONE COAT (1US Gal Jug)
ALUMETRON™ is an easy to apply clear polymer coating that bonds chemically and mechanically to aluminum for a smooth, durable, protective finish that resists environmental damage and attachment of dirt. It keeps your aluminum looking shiny and new all season even with constant water immersion.
DIRECTIONS
PREPARATION:
New Aluminum: Clean & degrease aluminum. Wet aluminum with water, spray BOAT CLEAN PLUS™ onto surface andwash with a MARINE POWER MITT™, cloth, sponge, or pressure washer. Hot water improves cleaning. Rinse and dry.
Fouled Aluminum: Remove fouling from aluminum with ALGEX™. Clean & degrease as above.
Tarnished Aluminum: Remove oxidation and stains with ALUMABRITE CBX®. Clean & degrease as above.
COVERAGE:
450ml / 16oz- 250 ft²
3.8L / 1US gal – 2,000 ft²
APPLICATION: Surface must be clean and dry.
WIPE: Apply 4 thin coats ALUMETRON™. Wipe on with a lint free cloth pad, in long, even, overlapping strokes. Do not overwork application or bubbles and streaking will result.
CURE TIME at 77°F – 50% R.H.: • To touch 10 min. • To recoat 20 min. • To light service 8 hrs. • To full cure 48 hrs. • To water immersion 96 hrs. • To application of VS721 96 hrs. | APPLICATION TEMPERATURE 15°C – 35°C 60°F – 95°FHUMIDITY <80% RH< |
CLEAN UP: Soap & Water. Cured ALUMETRON™ can be removed with lacquer thinners.
DAMAGE REPAIR: Repair scratched or abraded surface by cleaning damaged area as above and apply 4 thin coats of ALUMETRON™ with a folded cloth pad.
WATER IMMERSION: To protect surfaces that will be continuously submerged, apply 2 coats VS721 BOTTOM COAT™ to fully cured areas below the waterline. Coating the entire hull or pontoon with VS721™ reduces abrasion damage, makes cleaning and maintenance easier, reduces salt attachment and increased durability and longevity.
SAFETY: Wear safety glasses and protect skin from excessive exposure. If splashed in eyes, rinse with water for 10 minutes. If on skin, wash with soap and water.