Product DirectionsEnglishDri Stitch

Seam Sealer

DRI STITCH® penetrates into needle punctures in fabric caused from sewing, coating each thread with DRYKON® Nanoized Polymer to seal the voids, preventing leaks. Dries Clear.

SHAKE WELL BEFORE & DURING USE


DIRECTIONS:

Fabric must be clean and dry. On soiled fabric, clean area with FABRI-KLEAN® and allow to dry. Where possible apply 1 coat to the underside & 2nd coat to the top of the seam. Apply DRI STITCH® liberally to seams and stitching with the dauber attached to the lid of the can. When dry apply a second coat. Allow to cure for 24 hours. Protect from water, dew or moisture until cured. Apply above 60°F – 15.5°C.


DO NOT FREEZE


CAUTION:

May irritate eye & skin. Do not get in eyes or on skin. Do not breathe mist/vapours/spray. Keep out of reach of children. Keep away from flames or sparks. Wear protective gloves/clothing and eye/face protection when mixing or using. Use in well ventilated area, wear suitable respiratory equipment if required.

FIRST AID:

Contains para-chlorobenzenetrifluoride (60-80%). If swallowed, Do NOT induce vomiting, call a Poison Control Centre or doctor. If in eyes or on skin, rinse well with water. If irritation persists get medical attention. If breathed in, move person into fresh air.